e·poc™
Full Distribution Luminaire
A new epoch has dawned in indoor lighting, characterized by clean lines, full light distribution, low contrast luminance, and heightened attention to energy reduction and sustainability. The e·poc™ Full Distribution Luminaire embodies these qualities in a 2-lamp lensed package. Available in both T5 and T8, e·poc incorporates a multitude of lamp/ballast combinations and controls compatibility into a stylish linear design. e·poc also offers a choice of optical aesthetics and an ease of serviceability that is unmatched.
 |
 |
 |
| Download Fixture or Ballast Spec Sheet (PDF) | Download Brochure (PDF) | Download Photometric Report (IES/PDF) |
Why EPC is a Better Energy Choice
At 60 watts for the 28W T5 configuration, 65 watts for the 32W T8 configuration, and 56 watts for the 28W T8 configuration, e·poc uses 23-34% less energy than a standard 3-lamp T8 system.
The most restrictive energy code has a 1.0W per square foot requirement for offices. Using a typical installation with the fixture on 8' × 10' centers, e·poc with 28W T5 lamps uses 0.75W per square foot, with 32W T8 lamps uses 0.81W per square foot, and with 28W T8 lamps uses 0.70W per square foot. Not only does e·poc satisfy the code requirements, it frees up additional watts to use elsewhere in the building.
At 60 watts for the 28W T5 configuration, 65 watts for the 32W T8 configuration, and 56 watts for the 28W T8 configuration, e·poc uses 23-34% less energy than a standard 3-lamp T8 system.
The most restrictive energy code has a 1.0W per square foot requirement for offices. Using a typical installation with the fixture on 8' × 10' centers, e·poc with 28W T5 lamps uses 0.75W per square foot, with 32W T8 lamps uses 0.81W per square foot, and with 28W T8 lamps uses 0.70W per square foot. Not only does e·poc satisfy the code requirements, it frees up additional watts to use elsewhere in the building.